Equipment Programming Error Codes - Toshiba CTX100-S Programming Manual

Equipment Programming Error Codes

Program Code
49
49
49
49
801
50
50
50
80
49
803
50
804 80
Strata CTX Programming - Part 4: Appendices 11/03
Occurred Sub-
FB parameter
Server Port Number must be entered when PC Operation
7!
Type is set to Server, or Client Port Number must be entered
when PC Operation Type is set to Client.
If a CTI value (200~208) is assigned to the Logical Device in
7"
Program 803, then Data Flow must be set to
Asynchronization.
When PC Operation Type is set to Client, the Client Port
7(
Number cannot be deleted.
When PC Operation Type is set to Server, the Server Port
7#
Number cannot be deleted.
When "Server" is selected, the Server Port number (FB04) is
7!
not able to assign "0". When "Client" is selected, the
connecting port number (FB06) is not able to assign "0".
When "Server" is selected, the Server Port number (FB04) is
7#
not able to assign "0".
When "Client" is selected, the connecting port number (FB06)
7%
is not able to assign "0".
The values assigned in Program 803 conflict with related I/O
7
Logical and Physical Device assignments.
The selected port conflicts with existing devices, such as CTI,

etc.
The Physical Device assignment conflicts with existing serial

number assignments.
The values assigned in Program 803 conflict with related I/O

Logical and Physical Device assignments.
Equipment Programming Error Codes
Error Descriptions
System Error Codes
B-27