Toshiba CTX100-S Programming Manual page 341

Table 13-13 Program 117
Button Sequence
120
Tenant Data
Assignment
! C‚yq
,
120-00 Tenant Number
C‚yq
n, ,
120-01, Dial 0 Call Day 1, 2, or
120-02, 3 Dst Type
120-03
A7 C‚yq
, n=1 or 3,
or (see next row)
A7 !Ã
, n= (Dialing
Tƒx…
Digits), .
DEST=enter values.
C‚yq
120-04 Night Mode Relay
A7# C‚yq
, n,
120-05 Night Bell Relay
A7$ C‚yq
, n,
Strata CTX Programming - Part 3: Telephone Button Programming 11/03
Value(s)
n = 1~8. No Data (Default)
n = 1. No Data (default)
2. Dialing Digits (see
"n=2" below)
3. Night Bell
DEST Up to 32 digits for each
= Day Mode selected
(default = noData)
n = BIOU 1 = relay 1~4
BIOU 2 = relays 5~8
ACTU = relay 5
n = BIOU 1 = relay 1~4
BIOU 2 = relays 5~8
ACTU = relay 5
Telephone Button Programming
Summary
This program enables you to select an Attendant or Night Bell to ring
when dialing 0 in Day 1, Day 2 or Day 3 mode for up to eight different
Tenants. You can also assign the general purpose relay to the Night
Bell in this program.
Select the Tenant number for which the daily schedules will be
configured.
Select to call an Attendant or select to ring the Night Bell when dialing
the Tenant Attendant Access Code in the Day1, Day 2, or Day 3
mode for this Tenant.
The Tenant Attendant Access Code must be assigned in Prg 102. If it
should be "0," the Attendant Console Group Access Code, which is
"0," must be deleted.
Enter the PDN of the Attendant (BATI) to ring when dialing Tenant
Attendant Access Code in Day, Day2, or Day 3 mode.
Enter the General Purpose relay number assigned to the Night Bell.
BIOU relays 1~8. This operation activates the relay continuously
when the system is in the night mode.
Enter the General Purpose relay number assigned to the Night Bell.
BIOU relays 1~8. This operation activates the relay when a CO line or
DID rings when the system is in night mode. The CO or DID line must
be assigned to ring the night bell.
100 Series Programs
13-27