Toshiba CTX100-S Programming Manual page 362

Telephone Button Programming
200 Series Programs
Table 13-25 Programs 208~218 (continued)
Button Sequence
214 DSS Console
Assignment
! # C‚yq
,
214-00 Primary DN
C‚yq
n,
214- DSS 1~DSS 8
01~08
A7 A7'
~ , xxyyzz,
C‚yq C‚yq
,
215 DSS Feature Keys
! $ C‚yq
,
215-00 PDN+DSS
C‚yq
yyyyyx,
13-48
Value(s)
n = Up to 5 digits
xx = Cabinet (01~07)
yy = Slot (01~10)
zz = Circuit (01~08)
yyyyy = Primary DN (0~99999)
x = DSS (1~8)
Strata CTX Programming - Part 3: Telephone Button Programming 11/03
Summary
This assignment allows up to eight Direct Station Selection (DSS)
Consoles to be assigned to a station. The assignment is referenced
to the stations's Primary DN.
Enter the Prime Directory Number of the station that is to be
associated with the DSS console(s).
Enter the DSS equipment number as xxyyzz.
•
Cabinet – Select 01 for Base and Expansion cabinet (CTX100).
Select 01 for Base and 02~07 respectively for each Expansion
cabinet (CTX670).
• Slot – Select 01~04 for Base slots and 05~08 for Expansion slots
(CTX100).
Select 01~08 for Base slots and 01~10 for Expansion slots.
Example: If the DSS console should be connected to a PDKU or
BDKU/BDKS in cabinet shelf 5, slot 2, circuit 3, enter 050203.
Note If a PDN is assigned to the DSS equipment number it must
be deleted, using PRG201, before attempting to assign the
DSS console.
The Feature Key assignment allows each key on the telephone to be
addressed and assigned a code representing the function to be
performed. Some feature keys require additional parameters to
completely define the key. For example, a Phantom DN needs a
directory number, ringing assignment, and the tone pitch when ringing
occurs.
Enter a Primary DN plus DSS Key Assignment button to program
DSS FBs.
Note FB04 Add on Modules in Program 204 must be set to One or
Two.