Dss Console Assignment - Toshiba CTX100-S Programming Manual

Strata ctx digital business telephone systems
Hide thumbs Also See for CTX100-S:
Table of Contents

Advertisement

Station
Assignment

214 DSS Console Assignment

Prerequisite Program:
This assignment allows up to eight Direct Station Selection (DSS) Consoles to be assigned to a station. The
assignment is referenced to the stations's Primary DN.
1. From the Program Menu, click
Station > Assignment.
2. Click on the DSS tab (shown
right).
3. Enter a DN number in the
Primary DN field
...or click one of the following
buttons:
• List – view a summary list of
programmed DSSs.
• Extended List – view a
detailed list of programmed DSSs.
4. Enter the Equipment number in which the DSS(s) is installed.
5. Click Submit.
F
IELD
Prime DN
01~08 DSS Equipment
No. 1~8
5-14
200
page 5-1
D
ESCRIPTION
Enter the PDN of the station that is to be associated with the DSS console(s).
Possible values: Any string up to 5 digits (default = no value).
Enter the DSS equipment number as xxyyzz.
Cabinet – Select 01 for Base and Expansion cabinet (CTX100). Select 01 for
Base and 02~07 respectively for each Expansion cabinet (CTX670).
Slot – Select 01~04 for Base slots and 05~08 for Expansion slots (CTX100).
Select 01~08 for Base slots and 01~10 for Expansion slots (CTX670).
Example: If the DSS console should be connected to a PDKU or BDKU/BDKS in
cabinet shelf 5, slot 2, circuit 3, enter 050203.
If a PDN is assigned to the DSS equipment number it must be deleted, using
PRG201, before attempting to assign the DSS console.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ctx100Ctx670Strata ctx seriesStrata ctx100-sStrata ctx100Strata ctx670

Table of Contents