Storing A System/Station Speed Dial Number - Toshiba Strata CIX IP5000-Series User Manual

Feature Operations
Speed Dial
Table 9 Speed Dial Access Codes
Feature
Speed Dial (Dialling an SD number)
1
Station
1
System
1. Stations must be assigned/enabled Speed Dial capabilities in system programming by an
Administrator in Program 200-30 (System SD) and Program 200-35 (Station SD).
2. If your telephone does not have a Spdial button, press the
Speed Dial bin number (nnn).

Storing a System/Station Speed Dial Number

1. Dial
2. Dial the Station Speed Dial number (100~199) or System Speed Dial number
(200~999). The LCD shows your digits and you hear Entry Tone.
3. Dial the telephone number to be stored +
codes. The LCD shows "SPEED DIAL" + the Speed Dial Number + destination +
#. You hear Success Tone.
4. Lift handset.
5. To enter another number repeat steps 1-4. Refer to
Example: To store a Station Speed Dial number to Speed dial location 100, dial
#66
Table 10
Feature
Speed Dial (Storing an SD number)
1
Station
1
System
1. Stations must be assigned/enabled Speed Dial capabilities in system programming by an
Administrator in Program 200-30 (System SD) and Program 200-35 (Station SD).
2. Refer to
82
#66
. The display shows "SPEED DIAL" and you hear Entry Tone.
100 1932 841600
+ +
Feature Access Codes
Table 11 on page 83 to see how to enter
Feature Access Code Sequences
2
Spdial nnn
+
nnn = 100~199 Station SD numbers
2
Spdial nnn
+
nnn = 200~999 System SD numbers
*
#
.
Include any required access and area
#
+
Feature Access Code Sequences
#66 + nnn
+ Phone No.
nnn = 100~199 SD bin numbers
#66 + nnn
+ Phone No.
nnn = 200~999 SD bin numbers
*
and into a speed dial phone number.
#
Strata CIX IP5000-series Telephone User Guide
button, then dial the three digit
Table 10 below.
2
#
+
2
#
+