Did Intercept Assignments - Toshiba CTX100-S Programming Manual

Trunks

318 DID Intercept Assignments

318 DID Intercept Assignments
Prerequisite Program:
This command assigns the DID Routing table when DID numbers are undefined or not received.
1. Complete the
Assignment Record Sheet"
page D-26.
2. From the Program Menu, click
Trunk > DID Intercept.The DID
Intercept Assignments screen
displays (shown right).
3. Enter an ILG Number
...or click List to view a summary
list of programmed ILGs.
4. Enter DID Type in the 01 Type field.
5. Enter DID Intercept Assignment
data.
6. Click Submit.
F
IELD
ILG Number
01 Type
02 MOH Source
03 Group CO Destination
04 Pooled Line Group
6-16
304 page 6-2
"DID Intercept
on
D
ESCRIPTION
Enter ILG number.
Possible values: 1~32 (CTX100), 1~50 (CTX670 Basic),
Select Routing Type.
Possible values: No DID (default) or Not Determined
Select Music On Hold
Possible values: External 1~15 (default = External 1)
GCO Key Group number.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic),
POOL Line Key Group Number.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic),
1~128 (CTX670 Exp), (default = no value
0~128 (CTX670 Exp), (default = 0)
0~128 (CTX670 Exp), (default = 0)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03