Storing A System/Station Speed Dial Number - Toshiba Strata IPT User Manual

Storing a System/Station Speed Dial
#66
1. Dial . The display shows "SPEED DIAL" and you hear Entry Tone.
2. Dial the Station Speed Dial number (100~199) or System Speed Dial number
(200~999). The LCD shows your digits and you hear Entry Tone.
3. Dial the phone number to be stored +
shows "SPEED DIAL" + the Speed Dial Number + destination +
#. You hear Success Tone.
4. Release the featurephone. To enter another number, repeat the process, starting with
Step 1. Refer to Table 6
Example: To store a Station Speed Dial number on Index 100, dial
99495833000 #
+
Table 6: Feature Access Codes
Feature
Speed Dial (Storing an SD number)
Station 1
System 1
1. Stations must be assigned/enabled Speed Dial capabilities in system programming by an
Administrator in Program 200-30 (System SD) and Program 200-35 (Station SD).
2. Refer to Table 7 on page 71 to see how to enter * and # into a speed dial phone number.
IPT2008F-SDL Name Storage
If you have a IPT2008F-SDL phone, you can store names for Personal SD numbers (see
Personal Speed Dial Names" on page
STRATA IPT/DKT FEATUREPHONE USER GUIDE
#
. Include any required access and area codes. The LCD
below.
Feature Access Code Sequences
#66 + nnn + Phone No. 2 + #
nnn=100~199 Station SD bin numbers
#66 + nnn + Phone No. 2 + #
nnn=200~999 Station SD bin numbers
93).
#66 100
+ +
Toshiba Business Communications Division
"Storing
71 of 124