Toshiba CTX100-S Programming Manual page 99

F
IELD
04 Server Port Number
05~08 Client IP
Address
09 Client Port Number
10 Read Retry Number
11 Write Retry Number
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
D
ESCRIPTION
Enter the Server Port Number and proceed to 07 Read Retry Number. This field is
required if Server was selected in 02 PC Operation Type above. If not, leave this field
blank and proceed to 05 Client IP Address.
Possible values: 0~65535 (default = 0)
Note Use 6000 for Network BLF, 3000 for Network DSS and 5000 for Network
TPI.
Enter the Client LAN IP Address. This field is required if Client was selected in 02 PC
Operation Type above.
Possible values: 0~255 for each octet (default = 0)
Note Enter IP address of Stratagy iES32 or SES.
Enter the Client Port number. This field is required if Client was selected in 02 PC
Operation Type above.
Possible values: 0~65535 (default = 0)
Select the Read Retry counter.
Possible values: 0~10 (default = 1)
Select the Write Retry counter.
Possible values: 0~10 (default = 1)
System
I/O Device
4-31