Series Programs - Toshiba CTX100-S Programming Manual

Telephone Button Programming

200 Series Programs

200 Series Programs
Table 13-14 Programs 200~202
Button Sequence
200 Station Data
! C‚yq
,
200-00 Primary DN
C‚yq
n,
200-01 PDN Equipment
Number
A7
, xxyyzz,
200-02 Station Type
A7! C‚yq
, n,
200-03 Circuit Type
A7" C‚yq
, n,
200-04 Station COS
• Day1 COS
• Day2 COS
•
Night COS
A7# Tƒx…
, n, , n,
Tƒx… C‚yq
, n,
200-05 Station DRL
•
Day1 DRL
•
Day2 DRL
•
Night DRL
A7$ Tƒx…
, n, , n,
Tƒx… C‚yq
, n,
200-06 Station FRL
•
Day1 FRL
•
Day2 FRL
•
Night FRL
A7% Tƒx…
, n, , n,
Tƒx… C‚yq
, n,
200-07 LCR Group
A7& C‚yq
, n,
13-28
Value(s)
n = Up to 5 digits
xx = Cabinet 1 (CTX100),
01~02 (CTX670 Basic),
01~07 (CTX670 Exp.)
C‚yq
yy = Slot (01~10)
zz = Circuit (01~16)
n = 1. DKT
2. SLT
n = 1. Extension
2. Voice Mail
3. Announce (Not used in
USA or Canada)
n = 1~32
n = 1~16
n = 1~16
n = 1~16
This command assigns stations to the system.
Primary DN (enter an existing PDN or enter a PDN you wish to create
for a new station).
Enter the PDN equipment number (xxyyzz). This is the cabinet, slot,
and circuit number of the ADKU, BDKU/BDKS, PDKU, or RSTU
interface PCB to which the the PDN is, or should be assigned.
Example: If the PDN should be a assigned to a BDKU in cabinet 5,
slot 2, circuit 3; enter 050203.
Cabinet numbers:
•
CTX100: Select 01 for Base and Expansion cabinet.
•
CTX670: Select 01 for Base and 02~07 respectively for each
Expansion cabinet.
Slot numbers:
• CTX100: Select 01~04 for Base slots and 05~08 for Expansion
slots.
•
CTX670: Select 01~08 for Base slots and 01~10 for Expansion
slots.
Station Type.
Note Select SLT to set up voice mail.
Extension: Should be assigned to PDNs the are associated with
Digital or Standard telephones
Voice Mail: Should be assigned to PDNs associated with Voice Mail
RSTU circuits.
COS for Day1.
COS for Day2.
COS for Night.
DRL for Day1 (Used for Credit card calling).
DRL for Day2.
DRL for Night.
FRL for Day1.
FRL for Day2.
FRL for Night.
Station LCR Group Number.
Strata CTX Programming - Part 3: Telephone Button Programming 11/03
Summary