Station Speed Dial - Toshiba CTX100-S Programming Manual

Station

516 Station Speed Dial

516 Station Speed Dial
Prerequisite Program:
Up to 100 pre-programmed Speed Dial numbers (up to 32 digits each) can be assigned to each station.
Speed Dial numbers are stored in "Bins" and each station accesses the Speed Dial numbers by entering the
Speed Dial Bin number from their respective stations. The following advanced Speed Dialing features are
available in Strata CTX.
• Speed Dial Bin Linking – Whenever a Speed Dial number exceeds the 32-digit Speed Dial Bin memory
limitation, the digits exceeding the 32 digit limitation are automatically stored into the adjacent Speed
Dial Bin. The entire string is activated by using the primary Speed Dial Bin number.
Bin linking is automatic. Any previously programmed data in the "adjacent Speed Dial Bin" as
Note
described above is overwritten. Furthermore, if a number exceeding the maximum allowable dial
digit length is overwritten with a new number which complies to the 32-digit restriction, the excess
digits recorded in the next Bin (from the previous entry) is treated as a unique Speed Dial record.
• Speed Dial Number Nesting – A Speed
Dial number can be nested into another
Speed Dial number. For example, if an
international dialing prefix is used often,
program the prefix in any Speed Dial
Bin. Then in the another Speed Dial Bin,
program the first Bin number + the
number to dial. When the second Speed
Dial Bin is activated, Strata CTX first
retrieves and dials the international
dialing prefix from the first Bin location,
then adds the numbers to dial.
1. From the Program Menu, click Station >
Speed Dial. The Station Speed Dial
screen displays (shown right).
2. Enter Program 516 data.
3. Click Submit.
F
IELD
Primary DN
01 Speed Dial Bin
5-34
200 page 5-1
D
ESCRIPTION
Select the PDN assigned the speed dial number.
Enter the station speed dial bin number. A station can have up to 100 speed dial bins.
Possible values: 00~99 (default = no value)
Note Adding bin numbers here will automatically increment the number of speed dial
bins available to the station in increments of 10 speed dial bins. The number of
speed dial bins available to the station can also be assigned and displayed in
Prg 200, 35 - Station SpDial Bins. Example: If bin number 50 is entered here,
50 speed dial bins will automatically be assigned to the station and will also be
displayed in Prg 200, 35.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03