Account Codes - Toshiba CTX100-S Programming Manual

Account Codes

Program Number(s): 570, 506 and 571
Assign Account Code data to Strata CTX.
1. Complete the
Networking" on
2. From the Program Menu, click
Services > LCR/DR > Account
Codes.
3. Enter Program 570 data.
4. Enter Program 506 data. Click List
to view a summary list of
programmed Account Codes.
5. Enter Program 571 data.
6. Click Submit.
570 Account Code Digit Length
Prerequisite Program:
Accounting Codes need to be specified for the number of digits that are expected to be used for registering
a number. This allows dialing within Strata CTX to proceed automatically once the correct account code is
dialed. The following numbers are then dialed digits used for making the phone call.
A second length is provided to allow the number of digits to be used for verification of the code to be less
than the total code entered; thus, the code may contain two parts, one required and one part optional to the
user.
F
IELD
01 Verified Digit Length
02 Registered Digit Length
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
"Strata Net Private
page 9-39.
None.
D
ESCRIPTION
The Verified Digit Length sets a number of digits to verify with a pre-set list.
This number may be the same or smaller than the account code digits set to be
entered for creating a complete accounting code.
Note This field is not changed, when
page 9-36
Possible values: 4~15 (default = 4)
The Registered Digit Length sets a number for the digits to be entered to make
a complete accounting code entry.
Note The Registered Digit Length (
the Verified Digit Length (
Possible values: 4~15 (default = 6)
"506 Verified Account Codes"
are registered.
%
) must be greater than or equal to
%
).
Services
LCR/DR
on
9-35