License Activate - Toshiba CTX100-S Programming Manual

License Activate

Prerequisite Program:
This program enables activation of CTX WinAdmin licenses issued in Program 913.
F
IELD
Delay Timer
License Information
The following programs enable you to set up Licensing details for CTX WinAdmin users.
Prerequisite Program:
1. From the Program Menu, click
Operation > License Information.
2. View Licensing details for this
Strata CTX account.
This view is read-only
information.
F
IELD
CTX Release Number
Number of Serial
Ports
StrataNet QSIG
Networking
System Type
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
913 above
D
ESCRIPTION
Select Activation Delay Timer in hours.
Possible values: 0~24 (default = 0)
Notes
•
Enter 0 to issue or activate the license immediately or 1~24 to set the automatic
delay activation feature, where 1 = 1 hour delay; 2 = 2 hour delay, etc.
•
After the license is activated, use the License Information screen below to check
that all Ports and features have been activated properly.
None
D
ESCRIPTION
This is the Basic Release Number of CTX software. To view the Active Software
Version, go to Operations/System Setup.
This identifies the number of serial ports licensed on the BSIS.
One license is needed for each SMDR and SMDI device connected to BSIS.
(Programs 803 and 804 assigns BSIS ports).
This license must be enabled on each CTX in a QSIG Network.
This identifies the type of CTX system to which CTX WinAdmin is currently
connected.
Operation
License Information
10-21