Group Listening; Auto Busy Redial - Toshiba STRATA DK24 Manual

GROUP LISTENING
REPEAT LAST NUMBER DIALED
PROGRAMMABLE OPTION
Allows all persons present to hear the distant party's responses.
TO USE GROUP LISTENING
1) With the handset off-hook, press and hold them button
then place the handset on-hook and release the m
button.
l
SPKR and MIC LEDs light and the distant party's voice
is heard via the telephone's speaker.
2) When local response is required, lift the handset off-hook.
l
SPKR and MIC LEDs go off.
l
Telephone speaker is silenced.
l
Handset is activated.
NOTE:
Repeat the procedure as required.
AUTOMATIC OFF-HOOK SELECTION
PROGRAMMABLE OPTION
Allows Automatic Off-hook Selection of either an intercom path,
a CO line, or a CO line group. (The particulars must be pro-
grammed by your system administrator.)
NOTE:
The m button also selects the designated line/group
automatically.
TO MAKE A CALL
Lift the handset.
l
You will be connected to the option programmed.
NOTE:
If you hear silence after going off-hook, you must press the
m button or a
q
line button before making a call.
This feature enables you to automatically redial the last number
called by pressing the m button. If your telephone does not
have an m button, the 1 button serves the same function.
TO REDIAL LAST NUMBER CALLED
1) Lift the handset.
2) Press any available [9 line button.
l
Listen for dial tone.
3) Press the m (or the 1) button.
l
The last telephone number you dialed will automati-
cally be redialed.
4) Hang up when the call is completed.
AUTO BUSY REDIAL
After reaching a busy outside number, the system will automati-
cally redial that number at programmed intervals.
TO USE AUTO BUSY REDIAL
1) Access any available CO line and dial the outside tele-
phone number.
l
Receive busv tone.
2) Press the m button (or m I@.
l
ABR LED blinks (or hear confirmation tone).
3) Hang up (or press them button).
4) At programmed intervals (30 or 60 seconds), the system
will redial the number (15 times maximum).
l
With each attempt, if busy, ABR will reset for next try.
5) When the connection is made and the called party is
ringing:
l
CO (or INT) and SPKR LEDs blink.
l
Ringing tone is heard.
6) Pick up handset (or press the m button) and, wait for
party to answer.
10
11