Starting Ia770 Intuity Audix Messaging With The Messaging Web Pages, If Necessary; Starting Ia770 Intuity Audix Messaging With The Command Line, If Necessary - Avaya G700 Installing And Upgrading

3. Make sure everything except ENV, arbiter, and dupmgr shows UP. Communication
Manager should show 65/65 UP or, if IA770 is installed, 67/67 UP.
The number of processes (67/67) may vary depending on the configuration. For a normal
state, the second number should not be greater than the first number. For example, the
numbers 66/67 UP would indicate that a process did not come up and should be
investigated before proceeding.
If you need to start messaging, you can use either the Maintenance Web pages or the Linux
command line. For the Maintenance Web pages, see
Messaging with the Messaging Web pages, if necessary
command line method, see
line, if necessary
Starting IA770 INTUITY AUDIX Messaging with the Messaging
Web pages, if necessary
1. From the Maintenance Web Page, select Messaging Administration from the
Miscellaneous menu.
The Messaging Administration Web page is displayed in a new Web browser window.
2. From the Messaging Administration Web page, select Utilities.
The Utilities Web page is displayed.
3. Select Start Messaging Software.
The Start Messaging Software Web page is displayed. This page will display the status of
the system as it starts.
4. When the message, "Startup of the Voice System is complete", is displayed, select the
Return to Main button and do the next procedure in this document.
Starting IA770 INTUITY AUDIX Messaging with the command line,
if necessary
1. Access the server's command line interface using an SSH client, like PuTTY, and an IP
address of 192.11.13.6.
2. Type start -s Audix
Starting IA770 INTUITY AUDIX Messaging with the command
on page 737.
Upgrade the S8300
Starting IA770 INTUITY AUDIX
on page 737. For the Linux
Issue 10.2 May 2007 737