Administering Ip Interfaces - Avaya G700 Installing And Upgrading

Manual installation of a new G700 with an S8300
To associate LSPs with a network region
1. On the IP Network Region screen, go to page 2.
IP Network Region Screen, page 2
change ip-network-region 1
INTER-GATEWAY ALTERNATE ROUTING
Incomming LDN Extension:
Conversion to Full Public Number - Delete:
Maximum Number of Trunks to Use:
LSP NAMES IN PRIORITY ORDER
1 node-10-LSP_____
2 ________________
3 ________________
4 ________________
5 ________________
6 ________________
2. Enter the names of up to six LSPs to be associated with region 1.
The LSP names must be the same as administered on the Node Names screen.
3. Submit the form.
4. Repeat for each network region with which you want to associate LSPs.

Administering IP Interfaces

This procedure assigns network region 1, as an example, to the S8300 media server.
To assign the network region and IP endpoint access to the S8300
1. At the SAT prompt, type change ip-interfaces procr.
The S8300 displays the IP Interfaces screen for the media server.
468 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
IP NETWORK REGION
Insert:
SECURITY PROCEDURES
1 challenge
2
3
4
5
6
Page 2 of 19