If Ia770 Intuity Audix Messaging Has Been Upgraded, Verify Messaging Has Started - Avaya G700 Installing And Upgrading

If IA770 INTUITY AUDIX Messaging has been upgraded, verify
messaging has started
If you installed IA770 INTUITY AUDIX Messaging, the messaging application should start after
you install the license. To verify that messaging has started, perform the following steps:
1. In the Maintenance Web Interface, under Server, click Process Status.
2. Select Summary and Display once and click View.
the View Process Status Results screen displays.
View Process Status screen
3. Make sure everything except ENV, arbiter, and dupmgr shows UP. Communication
Manager should show 65/65 UP or, if IA770 is installed, 67/67 UP.
The number of processes (67/67) may vary depending on the configuration. For a normal
state, the second number should not be greater than the first number. For example, the
numbers 66/67 UP would indicate that a process did not come up and should be
investigated before proceeding.
If you need to start messaging, you can use either the Maintenance Web pages or the Linux
command line. For the Maintenance Web pages, see
Messaging with the Messaging Web pages, if necessary
command line method, see
line, if necessary
Starting IA770 INTUITY AUDIX Messaging with the command
on page 602.
Replacing the S8300A
Starting IA770 INTUITY AUDIX
on page 602. For the Linux
Issue 10.2 May 2007 601