Installing a new G700 with an S8300 using the Avaya Installation Wizard
10. Complete the following fields:
enter a challenge key or password
●
re-enter challenge key or password
●
force password/key change on first login
●
Note:
Do not lock the account or set the password to be disabled.
Note:
11. Leave the defaults in the remaining fields.
12. Click Add.
The system tells the login is added successfully.
13. If you are upgrading an LSP such that you created this super-user login on the primary
controller, do the following also on the primary controller.
a. Log in with telnet or ssh.
b. At the Linux command line, type filesync -a <IP_address_of_LSP> , where
<IP_address_of_LSP> is the IP address of the LSP you are upgrading.
132 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server