Avaya G700 Installing And Upgrading page 395

Figure 43: Unregistered music-on-hold equipment connecting to KS-23395-L3 for a G700
Media Gateway
ALM
APP
ACT
1 SHUT DOWN
OK TO
REMOVE SERVICES
cydfhd2c LAO 092006
Figure notes:
1. G700 Media Gateway
2. MM711 Analog Media Module
3. RJ-45 connection
To connect an unregistered music-on-hold source to a G700 or G350 Media
Gateway using a KS-23395-L3 coupler:
1. Connect one end of an RJ-45 cable to a port in the MM711 Analog Media Module.
For a G350 Media Gateway only, connect the RJ-45 cable to a port in an MM714 Analog
Media Module or a fixed analog (LINE 1 or 2) port on the G350 front panel.
2. Connect the other end of the RJ-45 cable to a KS-23395-L3 coupler.
3. Connect the KS-23395-L3 coupler to the customer-supplied music source.
Follow the manufacturer's instructions to properly connect the music source to the
KS-23395-L3 coupler. Normally, you simply use an RCA cord.
4. Administer the switch for the new equipment.
SO EI SM EM SI EO
ALM
TST
ACT
SIG
E1/T1 EIA 530A DCE
2
ALM
S8300C
TST
C_V1
ACT
USB 1 USB 2 USB 3 1 2 3 4 5 6 7 8
ALM
TST
ACT
1 2 3 4 5 6 7 8
3
5
4
4. KS-23395-L3 coupler
5. RCA cord
6. Music source
Music-on-hold
6
Issue 10.2 May 2007 395