Figure 138: The Finish Up screen
Follow the on-screen instructions if you want to save the installation log file. Further
configurations, as described in this screen, can now be performed either remotely, via a
modem that you enabled with GIW, or locally.
Connect a modem, if necessary
If you enabled a serial or USB modem on the G350 during your GIW session, you can now
connect the modem.
Connecting a serial modem
1. Connect the serial modem to a working telephone line.
2. Connect the provided DB-25 adapter to the modem.
3. Disconnect the flat cable from the COM port of the laptop computer.
4. Connect the flat cable to the DB-25 connector on the modem.
Connect a modem, if necessary
Issue 4 February 2007
221