Avaya G700 Installing And Upgrading page 482

Manual installation of a new G700 with an S8300
6. Press F3 (Enter) to save your changes.
If properly administered, the G700 should register with the primary controller within 1–2
minutes. The IP Address, MAC Address, and Module Type fields are populated
automatically after the G700 media gateway registers with the server.
7. Type change media-gateway to view the Media Gateway screen.
Media Gateway screen (after registration with primary controller)
change media-gateway 1
Serial No: 012X06230551
Encrypt Link? y
Network Region: 1
Location: 1
Recovery Rule: none
Slot
V1:
V2:
V3:
V4:
V9:
The media modules installed in the G700 are listed next to their slot numbers. Verify that a
G700 media gateway has been successfully added.
To verify changes
1. At the SAT prompt, type list media-gateway.
Media-Gateway Report screen
list media-gateway
Num
1
2
482 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
MEDIA GATEWAY
Number: 1
Type: g700
Name: Swainsons
Module Type
S8300
MM712
MM711
MM710
MEDIA-GATEWAY REPORT
Name Serial No/
FW Ver/HW Vint
LabA 01DR07128730
21 .13 .0
Data MG2 02DR01130356
11 .2
Registered: y
FW Version/HW Vintage: 21.13.0 /0
IP Address: 135.9.41.150
Controller IP Address: 135.9.41.146
MAC Address:
Site Data:
Name
ICC MM
DCP MM
ANA MM
T1/E1 MM
IP Address/
Cntrl IP Addr
135.177.49.57
/0 135.177.49.59
135.177.49.90
.0 /0 135.177.49.40
Page 1 of 1
CF: 8 MB
Type NetRgn
RecRule
g700 1
1
g350 1
none
Reg?
y
n