10. Complete the following fields:
enter a challenge key or password
●
re-enter challenge key or password
●
force password/key change on first login
●
Note:
Do not lock the account or set the password to be disabled.
Note:
11. Leave the defaults in the remaining fields.
12. Click Add.
The system tells the login is added successfully.
13. If you are upgrading an LSP such that you created this super-user login on the primary
controller, do the following also on the primary controller.
a. Log in with telnet or ssh.
b. At the Linux command line, type filesync -a <IP_address_of_LSP> , where
<IP_address_of_LSP> is the IP address of the LSP you are upgrading.
If upgrading an LSP, synchronize translations from the primary
controller
If you are upgrading an LSP such that you created this super-user login on the primary
controller, do the following also on the primary controller.
1. Log in with telnet or ssh.
2. At the Linux command line, type filesync -a <IP_address_of_LSP>, where
<IP_address_of_LSP> is the IP address of the LSP you are upgrading.
Install the S8300
Issue 10.2 May 2007
427