If Using Ia770, Administering Switch Integration For H.323; Testing To Verify System Functionality; Completing The Upgrade Process (S8300 Is The Primary Controller) - Avaya G700 Installing And Upgrading

3. Type save translation and press Enter.
When the save is finished, the system displays the message,
Command successfully completed.

If using IA770, administering switch integration for H.323

The IA770 INTUITY AUDIX Messaging application uses H.323 signaling instead of the CWY1
board for integration with Communication Manager. The tasks for administering the H.323
integration are explained in Administering Media Servers to work with IA770.

Testing to verify system functionality

Test the system for functionality, if you are upgrading an S8300 primary controller;
1. Verify the following:
Telephones have dial tone
●
You can call from one telephone to another telephone on the system
●
You can make an external trunk call.
●
The media gateways have registered. Use the SAT command list media-gateway.
●
Completing the upgrade process
(S8300 is the primary controller)
Telnet to the S8300 (primary controller) and open a SAT session:
1. To check media modules
2. To enable scheduled maintenance
3. To busy out trunks
4. To check for translation corruption
5. To resolve alarms
6. To re-enable alarm origination
7. Backing up the system
on page 682
on page 682
on page 682
on page 682
on page 682
on page 683
on page 683
Post-upgrade tasks
Issue 10.2 May 2007 681