Upgrade The S8300; Installing New Software - Avaya G700 Installing And Upgrading

Upgrade the S8300

This section describes the procedures to upgrade the S8300B or S8300C Media Server from a
2.x, 3.x, or 4.0 release of Communication Manager to release 4.x. To upgrade from a pre-2.0,
use the procedures in

Installing new software

The first step in upgrading the S8300B or S8300C Media Server to Communication Manager
4.x is to copy the appropriate software release to the server hard drive using the Manage
Software screens of the Web Interface (see
server on page 652). The next step is installation of that release, which is now resident on the
S8300B hard drive, onto the S8300 Media Server. After you have finished with the Copy
Complete screen, click Continue. The Choose Software of the Manage Software: Install
screen displays.
Choose Software screen
This screen will show the release currently running on the S8300, and the releases resident on
the hard drive. To install the 4.x release, click the radio button next to the 4.x release and click
Continue.
Chapter 10: Manual upgrade of an S8300A and G700 to
Copying the software and firmware files to the
Upgrade the S8300
R4.0.
Issue 10.2 May 2007 657