Remastering The Hard Drive And Installing The Software - Avaya G700 Installing And Upgrading

Manual upgrade of an existing S8300B and G700 to S8300C with R4.0

Remastering the hard drive and installing the software

To begin the upgrade
1. Click Start > Run to open the Run dialog box.
2. Type telnet 192.11.13.6 and press Enter.
The first RP screen appears.
The first RP screen
I
Tip:
To navigate on these screens, use the arrow keys to move to an option, then
Tip:
press the space bar to select the option. Press Enter to submit the screen.
Note:
At this point, the installation script looks for the software CD on the DVD/CD drive
Note:
connected to the USB port. If the DVD/CD drive was not attached to a USB port
when the S8300 booted, you will not see any activity on the screen. In this case,
perform the following steps:
- Press the Shut Down button on the S8300 Media Server.
- When the OK-to-remove light comes on, connect the DVD/CD-ROM drive to a USB
port and reseat the S8300 in its slot.
3. Select Install and press Enter.
The Select Release Version screen appears.
714 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server