Test To Verify System Functionality; Making The Upgrade Permanent; Saving Translations - Avaya G700 Installing And Upgrading

Manual upgrade of an existing S8300B or S8300C and G700 to R4.0
If this occurs, you must do the following steps:
1. Obtain an IA 770 Replace variable w/ release number license file.
2. Install the license file.
3. From a command prompt, start the IA 770 process with the following command:
start -s Audix

Test to verify system functionality

Test the system for functionality by verifying the following:
Telephones have dial tone
●
You can call from one telephone to another telephone on the system
●
You can make an external trunk call.
●
The media gateways have registered. Use the SAT command list media-gateway.
●

Making the upgrade permanent

!
CAUTION:
You must make the upgrade of the software permanent so that the software is
CAUTION:
recognized and kept on the S8300. If you fail to make software permanent, then
the next time you reboot, old software will become active.
To make the upgrade permanent
1. From the Maintenance Web Interface main menu, under Server Upgrades click Make
Upgrade Permanent.
The S8300 displays the Make Upgrade Permanent window.
2. Click Submit.
When the new S8300 upgrade software is permanent, the S8300 displays the message:
The commit operation completed successfully

Saving translations

Note:
If the S8300 you are upgrading is an LSP, perform this task on the primary
Note:
controller.
666 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server