Avaya G700 Installing And Upgrading page 473

IP Network Region Screen
change ip-network-region 1
Region: 1
Location:
Name:
MEDIA PARAMETERS
Codec Set: 1
UDP Port Min: 2048
UDP Port Max: 3048
DiffServ/TOS PARAMETERS
Call Control PHB Value: 34
Audio PHB Value: 46
Video PHB Value: 26
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
Audio 802.1p Priority: 6
Video 802.1p Priority: 5
H.323 IP ENDPOINTS
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
Keep-Alive Count: 5
2. Complete the fields as described in Administration for Network Connectivity for Avaya
Communication Manager, 555-233-504.
Note:
It is strongly recommended to use the defaults in the screen. However, for the
Note:
RTCP Enabled and RSVP Enabled fields, the entry should be n (no).
3. If the network region of the G700 (1 in this example) is different from that of the S8400,
S8500, or S8700-series CLAN board(s), you must interconnect the two regions.
Press NextPage twice to display page 3, of the Inter Network Region Connection
Management screen.
This screen shows the source region (1) and the first 15 destination network region
numbers. (Pages 4–19 show destination regions 16–250).
IP NETWORK REGION
Authoritative Domain:
Intra-region IP-IP Direct Audio: yes
Inter-region IP-IP Direct Audio: yes
RTCP MONITOR SERVER PARAMETERS
Use Default Server Parameters? y
AUDIO RESOURCE RESERVATION PARAMETERS
Administer Communication Manager
Page 1 of
IP Audio Hairpinning? y
RTCP Reporting Enabled? n
RSVP Enabled? n
Issue 10.2 May 2007
19
473