Avaya G700 Installing And Upgrading page 682

Hide thumbs Also See for G700:

Table of Contents

Manual upgrade of an existing S8300B or S8300C and G700 to R4.0

To check media modules

1. Type list configuration all and press Enter.

2. Verify that the software is communicating with all media modules and that all media

modules are listed in the reports.

3. Make test telephone calls to verify that Communication Manager is working.

To enable scheduled maintenance

1. Type change system-parameters maintenance and press Enter.

2. Ensure that the Start Time and Stop Time fields' administration is the same as before the

To busy out trunks

1. Busy out trunks that were busied out before the upgrade (see

To check for translation corruption

1. Type newterm and press Enter.

If you do not get a login prompt and see the following message:

Warning: Translation corruption detected

follow the normal escalation procedure for translation corruption before continuing the

To resolve alarms

1. On the Maintenance Web Interface, under Alarms click Current Alarms to examine the

2. If any alarms are listed, click Clear All.

3. Resolve new alarms since the upgrade through Communication Manager using the

appropriate maintenance book.

682 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

To record all busyouts