Backing Up S8300 Recovery System Files - Avaya G700 Installing And Upgrading

Backing up S8300 recovery system files

Before installing the S8300 software, back up the system data in case you need to back out of
the upgrade. You should back up to an FTP, SFTP, or SCP server on the customer's network. To
do this, you need an FTP, SFTP, or SCP address and directory path and a user ID and
password to access the customer's network. Check with your project manager or the customer
for this information. You can also back up the system data to the S8300 hard drive.
To back up S8300 recovery system data
1. Under Data Backup/Restore, click Backup Now.
The Backup Now screen displays.
Backup Now screen (Part One)
2. Select Full Backup, if available with the existing release, or select all data sets:
Avaya Call Processing (ACP) Translations
●
Save ACP translations prior to backup
●
Note:
Select ACP translations only if the S8300 is a primary controller. Do not select it if
Note:
the S8300 is an LSP.
On-site Preparation for the Upgrade
Issue 10.2 May 2007 647