Chapter 11: Manual Upgrade Of An Existing S8300B Or S8300C And G700 To R4.0; Considerations For Upgrading The S8300B Or S8300C As A Primary Controller Or As An Lsp - Avaya G700 Installing And Upgrading

Hide thumbs Also See for G700:

Table of Contents

Chapter 11: Manual upgrade of an existing S8300B or

This chapter covers the procedures to upgrade the software on an installed Avaya S8300B or

S8300C Media Server from a 2.x or 3.x release to 4.x. The procedures to upgrade the G700

firmware use CLI commands instead of the Upgrade Tool. This chapter also covers the

procedures to upgrade the firmware on an installed Avaya G700 Media Gateway.

This chapter assumes that the currently installed S8300 is version B or C. The

S8300B is required to run Communication Manager release 2.0 or greater. The

S8300C is required to run Communication Manager release 4.0. If the currently

installed S8300 is version A, follow the upgrade procedures in

10: Manual upgrade of an S8300A and G700 to R4.0

Considerations for upgrading the S8300B or S8300C as a

primary controller or as an LSP

The S8300 can be configured as either the primary controller or as a local survivable processor

(LSP). When the S8300 is an LSP, the primary controller, running Avaya Communication

Manager, can be either another S8300 or an S8400, S8500, or S8700-series Media Server.

S8300C and G700 to R4.0

Issue 10.2 May 2007