If Using Ia770, Administer Communication Manager For Integrated Messaging; If Ia 770 Fails To Start After A New Installation; Complete The Installation Process (For An S8300 Lsp) - Avaya G700 Installing And Upgrading

Manual installation of a new G700 with an S8300
If using IA770, administer Communication Manager for
Integrated Messaging
A number of administration tasks must be performed to allow IA770 Integrated Messaging to
work. These tasks are explained in detail in
!
CAUTION:
IA770 INTUITY AUDIX Messaging processes messages using the G.711 codec
CAUTION:
only. Therefore, ensure that a codec set exists that uses only the G.711 codec.
Then, assign that codec set to a network region. And, finally, assign that network
region to the AUDIX signaling group that is linked to the IA770 INTUITY AUDIX
Messaging trunk group.

If IA 770 fails to start after a new installation

If you have installed or upgraded IA 770 INTUITY AUDIX and it does not start, you must ensure
that an IP address has been provided for use with IA 770. To check for the IP address, you must
use the Configure Server option through the Maintenance Web pages.
On the Configure Interfaces screen, ensure that a valid IP address is present in the Integrated
Messaging section.
Complete the Installation Process
(for an S8300 LSP)
Consult the planning documentation to obtain the necessary information to complete the
installation.
Part of the final process will be to:
Connect and administer test endpoints
●
Test endpoints
●
Complete the electrical installation
●
Enable adjunct systems
●
This completes the installation of the G700 Media Gateway with an S8300 LSP.
494 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Administering Media Servers to work with IA770
.