Remastering The Hard Drive And Installing The Software - Avaya G700 Installing And Upgrading

4. Type display and press Enter to confirm that Sending only CR is set.
5. Close the window by clicking on the X in the upper-right corner.
This resets your Microsoft telnet defaults and does not need to be done each time you use
Telnet.

Remastering the hard drive and installing the software

To do before you start the upgrade
1. Verify that the S8300 is inserted in slot V1.
2. Verify good AC power connections to the G700.
3. Avaya recommends using a UPS backup for media servers.
If a UPS is present, make sure the G700 is plugged into the UPS.
4. Verify that all Ethernet connections are secure, to ensure the file transfer process is not
interrupted.
To begin the upgrade
1. Click Start > Run to open the Run dialog box.
2. Type telnet 192.11.13.6 and press Enter.
The first RP screen
I
Tip:
To navigate on these screens, use the arrow keys to move to an option, then
Tip:
press the space bar to select the option. Press Enter to submit the screen.
Install the S8300
Issue 10.2 May 2007 125