Restoring Data Backup - Avaya G700 Installing And Upgrading

Restoring data backup

Do these tasks:
if the original release was between 1.2.0 and 1.3.9, and you performed a Linux Migration
●
backup
or if the original release was 2.0 or later and you performed a normal data backup
●
!
CAUTION:
If you used the Linux Migration Backup/Restore backup process, there will be a
CAUTION:
single backup file with a name starting with "upgrade-2.0." Be sure to restore that
backup file, not the backup sets that you may have created with the Data Backup/
Restore — Backup Now process. If you restore the wrong files, the system can
be damaged and the only recovery path is to remaster the S8300 hard drive
again. This recovery procedure can be started using the remaster command,
which is described in Maintenance Commands for Avaya Communication
Manager, Media Gateways and Servers, 03-300431. After running the remaster
command, reboot the S8300 to start the RP program and proceed with
Remastering the S8300 and installing the upgrade software
To restore backup data:
1. On the Maintenance Web Interface, under Data Backup/Restore select View/Restore Data.
The system displays the View/Restore Data screen.
View/Restore Data screen
Replacing the S8300A
on page 577.
Issue 10.2 May 2007 589