Obtaining Ethernet interface IP address and subnet mask
●
Completing the RFA process (Obtaining license and password file)
●
Running the Automatic Registration Tool (ART) for the INADS IP address, if necessary
●
page 122
Install the S8300
Inserting the S8300
●
Setting telnet parameters
●
Remastering the hard drive and installing the software
●
Accessing the S8300
●
Creating a super-user login, if necessary, for R4.0 or higher
●
Using the Avaya Installation Wizard (IW)
●
Configuring an X330 Expansion Module (if necessary)
●
Setting rapid spanning tree on the network
●
Administer an S8300 primary controller
Assigning Node Names and IP Addresses for the LSPs
●
Administering Network Regions
●
Associating LSPs with Network Regions
●
Administering IP Interfaces
●
Identifying LSPs to the S8300 primary controller
●
Administer an S8400, S8500, or S8700-series primary controller
Assigning Node Names and IP Addresses for the C-LANs and LSPs
●
Administering Network Regions
●
Assigning LSPs to the Network Regions
●
Administering IP Interfaces
●
Identifying the Survivable Processor on the primary controller
●
Administer the media gateway
Administering the Media Gateway
●
Complete the installation of the S8300 (if the primary controller
Updating IA770 INTUITY AUDIX Messaging, if installed
●
Backing up the system
●
If using IA770, administer Communication Manager for Integrated Messaging
●
Complete the Installation Process (for an S8300 LSP)
●
on page 123
on page 124
on page 128
on page 133
on page 175
on page 176
on page 177
on page 181
on page 183
on page 184
on page 189
on page 198
Tasks to install the S8300 and G700
on page 120
on page 125
on page 129
on page 172
on page 173
on page 175
on page 178
on page 188
on page 195
on page 200
on page 120
on page 180
on page 200
Issue 10.2 May 2007
on
115