Tasks To Upgrade The S8300A To Release 4.0; And Upgrade The G700 Firmware - Avaya G700 Installing And Upgrading

Tasks to upgrade the S8300A to release 4.0

and upgrade the G700 firmware

Before going to the customer site
Obtaining a USB DVD/CD-ROM drive
●
Getting information that the project manager provides
●
Filling in the EPW, if upgrading from release 1.3 or earlier
●
Getting the serial number of the G700, if necessary
●
Checking the number of allocated ports
●
Checking the availability of the FTP server for backing up data
●
Obtaining S8300 software and G700 firmware
●
Obtaining service pack files, if needed
●
Obtaining service pack and language files for IA770 INTUITY AUDIX Messaging, if
●
necessary
Completing the RFA process (obtaining license and password files)
●
Running the Automatic Registration Tool (ART) for the INADS IP address, if necessary
●
page 550
Ensuring a super-user login exists
●
Creating a super-user login, if one does not exist (releases earlier than Release 4.0)
●
page 553
Preparing for the upgrade to R4.0 on-site
Accessing the S8300
●
Removing the administration for the IA770 integration if CWY1 board is used
●
Checking current software release
●
Completing pre-upgrade tasks — if the S8300 is the primary controller
●
Getting IA770 data and stopping IA770 (if IA770 is being used)
●
Checking for any IA770 custom announcement sets (R2.0 only)
●
Stopping IA770
●
Backing up system files
●
Recording configuration information
●
Installing the pre-upgrade software service pack, if necessary
●
Tasks to upgrade the S8300A to release 4.0 and upgrade the G700 firmware
on page 548
on page 555
on page 564
on page 565
on page 544
on page 544
on page 544
on page 545
on page 545
on page 546
on page 551
on page 556
on page 568
on page 544
on page 545
on page 549
on page 555
on page 557
on page 561
on page 563
on page 569
Issue 10.2 May 2007
on
on
541