Testing The Switch-To-Adjunct Link - Avaya G700 Installing And Upgrading

Testing the switch-to-adjunct link

You can use the test, status, busyout and release commands to find and correct problems with
CDR links. For more information about these commands, see Maintenance Commands for
Avaya Communication Manager 3.0, Media Gateways and Servers, 03-300431.
status cdr-link
Link State: up
Maintenance Busy? no
Work with the vendor to test the link from the call accounting adjunct.
If a link does not come up immediately, use the busyout cdr-link and release cdr-link
commands to bring up the link.
Additional administration procedures for CDR equipment are provided in the Administrator
Guide for Avaya Communication Manager, 03-300509.
CDR LINK STATUS
Primary
Call detail recording (CDR)
Secondary
extension not administered
Issue 10.2 May 2007 373