Avaya G700 Installing And Upgrading page 532

Manual installation of a new G700 without an S8300
To define the IP interface of the S8400 or S8500 processor Ethernet port
Note:
This should have already been established as a part of normal S8400, S8500, or
Note:
S8700-series Media Server installation.
1. Type change ip-interfaces procr to open the IP Interfaces screen.
IP Interfaces Screen
change ip-interfaces procr
Enable Ethernet Port? y
2. Complete the fields as described the in
Table 35: IP interfaces field descriptions
Field
Type
Node name
IP Address
Subnet Mask
Enable Ethernet
Port?
Network Region
532 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Type: PROCR
Node Name: procr
IP Address: 135.9.41.146
Subnet Mask: 255.255.255.0
Nework Region: 1
Target socket load:
Display only. PROCR
The unique node name for the IP interface. The node
name here must already be administered on the Node
Names screen.
The IP address (on the customer LAN) of the Processor
Ethernet.
The subnet mask associated with the IP address for this
IP interface.
For more information on IP addresses and subnetting,
see Administration for Network Connectivity for Avaya
Communication Manager, 555-233-504.
The Ethernet port must be enabled (y) before it can be
used. The port must be disabled (n) before changes can
be made to its attributes on this screen.
The region number for this IP interface.
IP INTERFACES
Allow H.323 Endpoints? y
Allow H.248 Gateways? y
Gatekeeper Priority: 5
Table 35.
Conditions/Comments
Page 1 of 1
Link: 1
1 of 2