16. Click the
icon in the Action column.
The IP Addresses — G700 Media Gateway screen appears.
17. Complete the following fields:
IP Address — the IP address assigned to the Media Gateway Processor
●
Subnet Mask — the subnet mask assigned to the Media Gateway Processor
●
VLAN Number — the VLAN assigned to the Media Gateway Processor, normally the
●
same VLAN assigned to the primary controller
Number of IP Routes — the number of IP routes you are assigning to the Media
●
Gateway Processor. The next screen allows you to define each IP route.
Configure the G700 and upgrade firmware
Issue 10.2 May 2007
213