Avaya G700 Installing And Upgrading page 187

To define the IP interface of the S8400 or S8500 processor Ethernet port
Note:
This should have already been established as a part of normal S8400, S8500, or
Note:
S8700-series Media Server installation.
1. Type change ip-interfaces procr to open the IP Interfaces screen.
IP Interfaces Screen
change ip-interfaces procr
Node Name: procr
IP Address: 135.9.41.146
Subnet Mask: 255.255.255.0
Enable Ethernet Port? y
Nework Region: 1
2. Complete the fields as described the in
Table 9: IP interfaces field descriptions
Field
Type
Node name
IP Address
Subnet Mask
Enable Ethernet
Port?
Network Region
Administering an S8400, S8500, or S8700-series primary controller
IP INTERFACES
Type: PROCR
Target socket load:
Table
Display only. PROCR
The unique node name for the IP interface. procr is the
default node name. The node name here must already
be administered on the Node Names screen.
The IP address (on the customer LAN) of the Processor
Ethernet.
The subnet mask associated with the IP address for this
IP interface.
For more information on IP addresses and subnetting,
see "Administration for Network Connectivity for Avaya
Communication Manager, 555-233-504".
The Ethernet port must be enabled (y) before it can be
used. The port must be disabled (n) before changes can
be made to its attributes on this screen.
The region number for this IP interface.
Allow H.323 Endpoints? y
Allow H.248 Gateways? y
Gatekeeper Priority: 5
9.
Conditions/Comments
Page 1 of 1
Link: 1
1 of 2
Issue 10.2 May 2007 187