Configuring The S8300 - Avaya G700 Installing And Upgrading

Manual installation of a new G700 with an S8300

Configuring the S8300

To configure the S8300 server using the Maintenance Web Interface
!
CAUTION:
For a new installation, be sure you have set the time and timezone before
CAUTION:
proceeding. Failure to do so may cause network problems later.
1. On the S8300 Web page main menu, click on Configure Server under Server
Configuration and Upgrade. The system displays the Configure Server screen.
Configure Server Screen
2. Click Continue.
The system displays the Back Up Data Notice screen. Do one of the following options:
- For a new installation, a backup at this point is unnecessary. Perform a backup after
the installation.
- For an upgrade, perform the backup, as described in
compact flash media (S8300C Media Server only)
428 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
To back up the system to
on page 492.