Configuring Radius Parameters - HP V1910 User Manual

Item
Primary Server Status
Secondary Server IP
Secondary Server UDP Port
Secondary Server Status
Return to RADIUS configuration task

Configuring RADIUS parameters

From the navigation tree, select Authentication  RADIUS and then select the RADIUS Setup tab to enter the
RADIUS parameter configuration page, as shown in a.
Description
Set the status of the primary server, including:

active: The server is working normally.

blocked: The server is down.
If the IP address of the primary server is not specified or the specified IP address
is to be removed, the status is blocked.
Specify the IP address of the secondary server.
If no secondary server is specified, the text box displays 0.0.0.0.
To remove the previously configured secondary server, enter 0.0.0.0 in the text
box.
The specified IP address of the secondary server cannot be the same as that of
the primary server.
Specify the UDP port of the secondary server.
If the IP address of the secondary server is not specified or the specified IP
address is to be removed, the port number is 1812 for authentication or 1813
for accounting.
Status of the secondary server, including:

active: The server is working normally.

blocked: The server is down.
If the IP address of the secondary server is not specified or the specified IP
address is to be removed, the status is blocked.
list.