Page of 13

HP SN8000B Installation Instructions Manual

Director blade.
Hide thumbs
HP Director Blade Installation
Instructions
© Copyright 201 1–2012 Hewlett-Packard Development Company, L.P.
Printed in the US
Published: June 2012
Edition: 6
*5697-2056*
Overview
Use these installation instructions if you have purchased
one of the optional director blades listed in
Table 1 (page
1). Install the blades in compatible
director models only.
NOTE:
This document refers to blades by their
short names.
Table 1 Director blades
Short name
(imprinted
Model
on blade)
HP SN8000B
FC8-32E
8Gb 32-port
Enhanced Fibre
Channel Blade
HP SN8000B
FC8-48E
8Gb 48-port
Enhanced Fibre
Channel Blade
HP SN8000B
FC16-32
16Gb 32-port
Fibre Channel
Blade
HP SN8000B
FC16-48
16Gb 48-port
Fibre Channel
Blade
HP DC SAN
FCOE10-24
Director Switch
10/24 FCoE
blade
nl
option
HP DC SAN
FX8-24
Director Switch
nl
Multi-protocol
nl
Extension blade
option
HP DC SAN
FS8- 1 8
nl
Director
nl
Encryption
blade
HP SAN
FC4- 1 6
Director
nl
16-port 4Gb FC
blade
Page 1
Part
Compatible HP director
number
models
Q W 9 4 0 A
SN8000B 8-Slot SAN
Backbone Director,
SN8000B 4-Slot SAN
Director
QW9 4 1A
SN8000B 8-Slot SAN
Backbone Director,
SN8000B 4-Slot SAN
Director
QK71 3A
SN8000B 8-Slot SAN
Backbone Director,
QK71 3B
SN8000B 4-Slot SAN
Director
QK71 4A
SN8000B 8-Slot SAN
Backbone Director,
QK71 4B
SN8000B 4-Slot SAN
Director
AP866A
DC SAN Backbone
nl
Director,
AP866B
nl
DC04 SAN Director
AP865A
DC SAN Backbone
nl
Director,
AP865B
nl
DC04 SAN Director,
nl
SN8000B 8-Slot SAN
Backbone Director,
SN8000B 4-Slot SAN
Director
AR945A
DC SAN Backbone
Director,
AR945B
nl
DC04 SAN Director,
nl
SN8000B 8-Slot SAN
Backbone Director,
SN8000B 4-Slot SAN
Director
A7990A
2/128 SAN Director,
4/256 SAN Director
A7990B

Advertising

   Related Manuals for HP SN8000B

   Summary of Contents for HP SN8000B

  • Page 1

    HP Director Blade Installation Instructions Overview Use these installation instructions if you have purchased one of the optional director blades listed in Table 1 (page 1). Install the blades in compatible director models only. NOTE: This document refers to blades by their short names.

  • Page 2

    HP DC SAN FC8-64 BK798A DC SAN Backbone Director Director, BK798B 64-port 8Gb DC04 SAN Director, Fibre Channel SN8000B 8-Slot SAN Blade Backbone Director, SN8000B 4-Slot SAN Director HP SAN FC10-6 AK86 1A 4/256 SAN Director, Director AK861B DC SAN Backbone...

  • Page 3

    FC8-48E components FC16-32 components Figure 2 FC8-48E Figure 3 FC16-32 1. Power LED 2. Status LED 1. Power LED 2. FC ports 8–15 3. FC ports 24–47 4. FC ports 0–23 3. FC ports 0–7 4. Port status LED 5. FC ports 24–31 6.

  • Page 4

    FC16-48 components FCOE10-24 components Figure 4 FC16-48 Figure 5 FCOE10-24 1. Power LED 2. 10-GbE FCoE ports 0–1 1 3. Status LED 4. 10-GbE FCoE ports 12–23 1. Power LED 2. FC ports 0–23 3. Status LED 4. FC ports 24–47 Page 4...

  • Page 5

    FX8-24 components FS8- 1 8 components Figure 6 FX8-24 Figure 7 FS8-18 1. Power LED 2. 1 GbE ports 0–3 3. 10-GbE ports 0–1 4. FC ports 0–5 5. Status LED 6. 1 GbE ports 4–9 7. FC ports 6–1 1 1.

  • Page 6

    FC4- 1 6 components FC4-32 components Figure 8 FC4-16 Figure 9 FC4-32 1. Power LED 2. Status LED 1. Power LED 2. Status LED 3. FC Port 4. Port speed LED 3. FC Port 4. Port speed LED (left port) 5.

  • Page 7

    FC4-48 components FC8- 1 6 components Figure 10 FC4-48 Figure 1 1 FC8-16 1. Power LED 2. Status LED 3. FC Port 4. Port status LED 5. FC ports 0–15 1. Power LED 2. Status LED 3. FC Port 4. Port status LED 5.

  • Page 8

    FC8-32 components FC8-48 components Figure 12 FC8-32 Figure 13 FC8-48 1. Power LED 2. Status LED 1. Power LED 2. Status LED 3. FC Port 4. Port status LED 3. FC Port 4. Port status LED 5. FC ports 16–31 6.

  • Page 9

    FC8-64 components FC10-6 components Figure 14 FC8-64 Figure 15 FC10-6 1. Power LED 2. Status LED 3. FC port 4. Port status LED 5. FC ports 0–5 1. Status LED 2. Power LED 3. FC Port 4. Port status LED 5.

  • Page 10

    FC4- 1 6IP components FR4- 1 8i components Figure 16 FC4-16IP Figure 17 FR4-18i blade 1. Power LED 2. Status LED 3. FC Port 4. Port status LED 5. GbE ports 0–1 6. FC ports 0–15 1. Power LED 2. Status LED 3.

  • Page 11

    CR16-8 and CR16-4 use QSFP transceivers for ICL connections. For more information about supported transceivers, see the HP SPOCK website at http://www.hp.com/ storage/spock. You must sign up for an HP Passport to gain access. For information on SAN compatibility, see http:// 1. Filler panel with handle 2.

  • Page 12

    Locate an appropriate slot. Slots are numbered from left to right when facing the port side of the chassis. For the HP 4/256 SAN Director: Install the blades in slots 1 through 4 and 7 through 10. 1. 4/256 SAN Director 2.

  • Page 13: For More Information

    HP B-series SN8000B 8-Slot SAN Backbone upper and lower rail guides in the slot. Director Switch Hardware Reference Guide Slide the blade into the slot until it is firmly HP HP B-series SN8000B 4-Slot SAN Director seated (Figure 20 (page 13)).

Comments to this Manuals

Symbols: 0
Latest comments: