Field Service Ver. 1.0 Aug. 2006
B. JOB TIMEOUT
Function
• Specifies the length of time until the print job being received is timed out when the
USB interface is being used.
Use
• To set the amount of time before a print job sent to the USB interface times out.
Setting
• The default setting is 60 (seconds).
/procedure
11.7.3
PARALLEL
A. JOB TIMEOUT
Function
• Specifies the length of time until the print job being received is timed out when the
parallel interface is being used.
Use
• To set the amount of time before a print job sent to the parallel interface times out.
Setting
• The default setting is 30 (seconds).
/procedure
11.7.4
ACTIVE I/F
Function
• Sets the interface to be used.
Use
• To set the interface to be used.
Setting
• The default setting is ETHERNET.
/procedure
NOTE
• Only one I/F will work at any given time between [ETHERNET] and [PARAL-
LEL]. Printer will reboot automatically if active I/F is changed.
11.8 SYSTEM DEFAULT MENU
11.8.1
PRINT QUALITY
Function
• Selects the image quality for prints.
Use
• To change the image quality setting.
Setting
• The default setting is HIGH.
/procedure
11.8.2
COLOR MODE
Function
• Specifies whether printing is in full color or grayscale.
Use
• To select color or grayscale printing.
Setting
• The default setting is COLOR.
/procedure
11. MENU (magicolor 2550/magicolor 2550DN)
0 to 999
0 to 999
"ETHERNET"
"HIGH"
"COLOR"
PARALLEL
STANDARD
GRAYSCALE
115