Wall And Rack Mount Bracket Summary; Ethernet Cable Specifications; Table 3: Wall And Rack Mount Brackets; Table 4: Twisted Pair Cabling And Distances - Allied Telesis AT-FS710/5 Installation Manual

Wall and Rack
Mount Bracket
Summary
Ethernet Cable
Specifications
The FS710 Series switch can be mounted on a table top, on a wall or in a
19" rack. No additional hardware is required for installing the unit on a
table top. If you plan on mounting the unit on a wall or in a rack, Table 3
shows brackets options available.
Table 3. Wall and Rack Mount Brackets
Model
AT-FS710/5 Use wall mounting holes
and /5E on bottom of chassis.
Use AT-BRKT-J23 wall
AT-FS710/8
and /8E NOTE: This kit must be
Use AT-BRKT-J22 wall
AT-FS710/16
and /16E NOTE: This kit must be
Use AT-BRKT-J22 wall
AT-FS710/24
NOTE: This kit must be
Table 4 contains the cabling specifications for the twisted pair ports.
Table 4. Twisted Pair Cabling and Distances
Speed
10 Mbps Category 3 or better unshielded
twisted pair cable
100 Mbps Category 5 or unshielded
twisted pair cable
Note
The twisted pair ports on the switch feature Auto-MDI. Each port is
individually configured as MDI or MDI-X when connected to an end-
node. Consequently, you can use a straight-through twisted pair
cable when connecting any network device to a twisted pair port on
the switch. A port operating at 10 or 100 Mbps uses four of the eight
strands in twisted pair wiring. See Table 15 and Table 16 on
page 64 for more information.
Wall Mount
mount kit.
ordered separately.
mount kit.
ordered separately.
mount kit.
ordered separately.
Type of Cable
Rack Mount
These models are not rack
mountable.
AT-RKMT-J08 19" rack
mount kit.
NOTE: This kit must be
ordered separately.
Rack *2pcs+screw (to
device)*4pcs
Rack *2pcs+screw (to
device)*4pcs
Maximum Operating
Distance
100 m (328 ft)
100 m (328 ft)
26 26