Chapter 27.Web Server Commands; Ip Http Server; Ip Http Port - Allied Telesis AT-8000S Cli Reference Manual
Layer 2 ethernet switch
Hide thumbs
Also See for AT-8000S:
- Cli user's manual (403 pages) ,
- Cli reference manual (334 pages) ,
- User manual (249 pages)
Table of Contents
Advertisement
Allied Telesyn AT-8000S Switch
CLI Reference Guide
Chapter 27.Web Server Commands
ip http server
The ip http server Global Configuration mode command enables configuring the device from a browser. To
disable this function, use the no form of this command.
Syntax
ip http server
no ip http server
Default Configuration
HTTP server is enabled.
Command Mode
Global Configuration mode
User Guidelines
Only a user with access level 15 can use the Web server.
Example
The following example enables configuring the device from a browser.
Console(config)# ip http server
ip http port
The ip http port Global Configuration mode command specifies the TCP port to be used by the Web browser
interface. To return to the default configuration, use the no form of this command.
Syntax
ip http port port-number
no ip http port
Parameters
•
port-number — Port number for use by the HTTP server. (Range: 0 - 65535)
Default Configuration
The default port number is 80.
Command Mode
Global Configuration mode
Page 272
Advertisement
Table of Contents
