Oil Pump Inspection; Oil Pump Installation - Honda MBX50 Workshop Manual

�HONDA
� MBX50· MBXSO
Remove the oil pump and inspect the following
items:
Damaded or weakened 0-rings.
Damage to crankcase mating face.
Damage to pump body.
Improper oil control lever.
CAUTION
Do not disassemble the oil pump.
Install the oil pump by aligning the pin on the pump
drive shaft with the groove in the pump driven
gear.
NOTE
Lubricate the 0-ring with clean grease
®
before installation.
"' Make sure that the oil pump is inserted
into the crankcase properlv.
Secure the oil pump using the oil pump set plate,
bolt and screw.
NOTE
Apply locking agent to the bolt and screw I
threads.
Reconnect the oil pump control cable.
Reinstall the oil tube and oil pass tube.
Install the carburetor. (Page 4-9).
NOTE
Perform the following inspections and adjust­
ments:
Control cable adjustment (Page
®
Oil pump air bleeding (Page 2-7).
®
Oil pass tube air bleeding (Page 2-7).
e,
Oil leaks.
®
(1) MAT ING FACE
(1) 01 L PUMP SET PLATE
__J
3-5).
(2) CONTROL LEVER
( 3) 0-RING
I
I
LUBRICATION
2-6