Removing Gear Case Assembly; Removing Crankshaft Collar And Oil Slinger - Kubota D1102-B Workshop Manual

(A) Inside view of gear case assembly
CD

Removing Gear Case Assembly

1) Remove the gear case.
2) Remove the 0-ring.
(Important)
• When reassembl ing do not forget to refit the 0-ring.
• Apply some grease to the oil seal, and refit it carefully
so that its l i p
(b) 0-ring
(f)

Removing Crankshaft Collar and Oil Slinger

1) Remove the crankshaft collar, the 0-ring, oil slinger
and the crank gear collar (D1102-B, D1302·B, D1402·B
only) in that order.
( Note for reassem bling)
• Apply oil to the 0-ring. Do not conf use assem bl ing
order.
(1) Oil slinger
(2) 0-ring
(3) Crank shaft collar
(4) Crank gear collar
(5) Oil slinger
(6) 0-ring
(7) Crank shaft collar
41
will
not peal off .
KiSC issued 09, 2007 A