Removing Fan Drive Pulley; Removing Gear Case - Kubota WSM 05-E4B Series Workshop Manual

4. ENGINE
• After cleaning the oil strainer, check to see that the
filter mesh in clean, and install it.
• Visually check the O-ring, apply engine oil, and
install it.
• Securely fit the O-ring to the oil strainer.
• To avoid uneven tightening, tighten oil pan
mounting screws in diagonal order form the center.

5.14 Removing fan drive pulley

1. Secure the flywheel to keep it from turning.
2. Remove the fan drive pulley screw.
3. Draw out the fan drive pulley with a puller.
(When reassembling)
• Install the pulley to crankshaft, aligning the mark (1)
on them (3-cylinder engine).
(1) Aligning mark
• Apply engine oil to the fan drive pulley retaining
screw. And tighten it.
• Tighten to the specified tightening torque.
Tightening tor- Fan drive pulley
que screw

5.15 Removing gear case

1. Remove the fuel feed pump.
4-36
236 to 245 N⋅m
24.0 to 25.0 kgf⋅m
174 to 180 lbf⋅ft
5. Disassembling and assembling
2. Remove the gear case.
SERVICING
05-E4B SERIES,05-E4BG SERIES
KiSC issued 03, 2023 A