Save/Backup/Restore Tools For Lp Configuration; Backing Up The Lpar Manager Configuration As Of A Time Before Device Isolation - Hitachi CB 520H A1 User Manual

After creating backup files
– Change of LP system settings
– Add and delete of LPAR, change of LPAR settings
– Change of boot order settings for LPAR
– Change of EFI driver settings for LPAR

Save/backup/restore tools for LP configuration

The following table shows the save/backup/restore tools for LP configuration.
Non-operating state
Operating state
Notes:
1 When you use HCSM to change the LPAR manager configuration, HCSM
.
automatically saves the LPAR manager configuration information.
Backing up the LPAR manager configuration as of a time before
device isolation
When device isolation occurs, the LPAR manager does not detect devices in
startup of the LPAR manager. At that time, part of the LPAR manager
configuration on devices is cleared or reset.
By using the KeepConfig option, the LPAR manager does not save the LPAR
manager configuration in device isolation until exit of safe mode and holds
LPAR manager configuration before device isolation.
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Table 6-1 Save/backup/restore tools
LP status
Web/CLI console
HCSM
SC/BSM
HVM Navigator
LPAR manager
screen
HvmSh
Web/CLI console
HCSM
SC/BSM
HVM Navigator
LPAR manager
screen
HvmSh
LPAR manager backup
Tools Save
-
-
-
-
-
-
Y
1
Y
Y
Y
Y
Y
Backup Restore
Y Y
- -
Y Y
- -
- -
- -
Y -
- -
Y -
- -
- -
- -
6-3