Before Copying; Document And Paper Handling; Changing Your Machine To The Copy Mode; Display In The Copy Standby Mode - Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 User Manual

Before copying

Document and paper handling

Before you begin making copies, please read the information of the document and paper
handling mentioned on pages 2.10 to 2.16.

Changing your machine to the Copy mode

Press the

Display in the copy standby mode

Press
COPY
(For MFX-1330 model, Copy mode is the default standby mode.)
When the machine is in the Copy mode, the machine shows:
Copy Ready
Auto
To change the settings, refer "Basic copy settings" on page 7.4.
Memory overflow message
If you have stored too much information in your machine's memory, a "Memory Over-
flow" message will appear on the LCD:
Memory Overflow
Start or Cancel
This appears because (1) too many pages have been stored in the memory, or (2) the
stored pages have too much information for your machine to remember.
If this message appears, press
memory, or press
operation (but not previous operations).
NOTE: If you do not operate your machine within 3 minutes, the machine will automatically print
the document stored in the memory during the current operation.
7.2 C
OPYING
key until COPY light glow.
COPY  FAX  SCAN
to change the machine to the copy mode.
 
FAX SCAN
01
Ltr 100%
Document size
Recording paper size
START
to delete from memory all pages stored during the current
CANCEL
Number of copies
Zoom ratio
to tell your machine to copy as many pages in