Loading Paper For Copying; Preparing A Document - Muratec F-112P User Manual

4.2
C
OPYING

Loading Paper for Copying

The instructions for loading print materials are the same
whether you are printing, faxing or copying. For coping, you can
use Letter-, A4-, Legal-sized print materials. For further details,
see page 1.12 for loading in the paper tray and page 2.8 for
loading in the manual feeder.

Preparing a Document

Using the ADF (Automatic Document Feeder), you can load up
to 30 documents (75g/m
When you use the ADF:
• Do not load documents smaller than 142 x 148 mm or larger
than 216 x 356 mm.
• Do not attempt to feed the following types of documents:
- carbon-paper or carbon-backed paper
- coated paper
- onion skin or thin paper
- wrinkled or creased paper
- curled or rolled paper
- torn paper
• Remove all staples and paper clips before loading documents.
• Make sure any glue, ink or correction fluid on the paper is
completely dry before loading documents.
• Do not load documents containing different sizes or weights
of paper.
• Do not load booklet, pamphlet, transparencies or documents
having other unusual characteristics.
2
, 12.5~24lb) for one job.